Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the spark plug of the KTM Duke 125.

Model: Ktm Duke 125
Part: Spark plugs

Video tutorial

In this video, we see how to replace the spark plug on the KTM Duke 125: you need a 13 mm magnetic socket wrench to remove it without worrying about it falling inside, as that would really be a problem. Additionally, the space to work in is quite limited, making the operation really challenging.

Once we have removed the used spark plug, we place the new one in using the same system with the magnetic socket wrench. Once positioned, we screw it in by hand first, and then tighten it with the wrench until it is secure (without over-tightening it). We then put the rubber cap back on, and the operation is complete.


Posted on 21 December 2025 by ScegliAuto


Related tutorials

Duke 125 To replace the spark plug on the KTM Duke 125, you need to remove the coil located at the top of the engine block cylinder: the coil is accessible fr…
Duke 125 In today's tutorial, you will learn how to replace the engine spark plug on the KTM Duke 125, as well as the Duke 390. First, remove the fuel tank by…
Duke 125 In this video, let's see how to remove and replace the spark plug on a KTM Duke 125 and 390, following the instructions below. First, remove the spar…

How to Change the Engine Oil of the Triumph Trophy 900

To change the engine oil of the Triumph Trophy 900, first, remove the drain plug located at the central lower part of the bike. Once the plug is loosened, collect all the used oil in a suitably positioned container. Next to the drain plug, you will also find the oil filter, which needs to be removed and replaced with a new part. After completing these steps, top up the oil through the breather located on the left side of the bike.

Watch the video!


by ScegliAuto

More videos