Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Ktm
    3. : Smr 450

How to Replace the Engine Oil and Filter on a KTM SMR 450

Model: Ktm Smr 450
Part: Oil filter

Video tutorial

How do you maintain your motorcycle? Let’s see how to replace the engine oil and filter on a KTM SMR 450. Position the motorcycle on a stand; remove the plastic filler cap and use a spanner to unscrew the bolt from the oil sump (drain the fluid into a container).

Unscrew the securing screws of the plate covering the oil filter.

Remove the worn oil filter kit and position a new one after cleaning the engine. Finally, top up the new fluid in the engine and close with the plastic cap.


Updated on 9 March 2026 by ScegliAuto


Related tutorials

Engine Oil and Oil Filter Replacement for the KTM SMR 690
Engine Oil and Oil Filter Replacement for the KTM SMR 690
Smr 690 The routine maintenance service, including the engine oil and oil filter replacement, must always be performed at the intervals specified by the manu…
How to Change the Engine Oil and Coolant on the KTM SX-F 450
How to Change the Engine Oil and Coolant on the KTM SX-F 450
Sx F 450 Today, we will see how to perform routine maintenance by changing the engine oil, oil filter, and coolant on the KTM SX-F 450 enduro bike. First, rem…
How do you replace the motor oil of the TM Racing SMR 450?
How do you replace the motor oil of the TM Racing SMR 450?
Smr 450 F In order to replace the motor oil of the TM Racing SMR 450, you need to loosen the oil tank drain plug, which is located at the bottom of the vehicle…

How to change the transmission oil on the Honda PCX 150 scooter?

In this tutorial, you will see how to change the transmission oil on the Honda PCX 150 scooter, a very simple and quick operation. First, ensure the engine is completely cold, then locate the three bolts at the end of the casing and position a container underneath them. Next, remove the two inner bolts using a 12 mm socket, clean them of any dirt, and allow all the oil in the system to drain out. At this point, tighten the lower bolt and, using a pump or syringe, add new oil through the upper hole.

Watch the video!


by ScegliAuto

More videos