Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Ktm
    3. : Ktm 250

How to Replace Engine Oil and Oil Filter on a KTM

Model: Ktm Ktm 250
Part: Engine oil

Video tutorial

In this short video, you will see step by step how to change the engine oil on your KTM 250. First, take a 13 mm socket spanner and a container for the used oil. The first step is to drain the oil. To do this, unscrew the drain plug (located at the front of the sump above the gear lever) using the 13 mm spanner and collect the oil in the container.

Once done, refit the drain plug and add the new oil. Unscrew the filler cap and, using a funnel, pour the oil into the bike.


Updated on 9 March 2026 by ScegliAuto


Related tutorials

How to Replace the Spark Plug on a KTM Dirt Bike
How to Replace the Spark Plug on a KTM Dirt Bike
Ktm 250 Hello, today you will focus on replacing the spark plug on your KTM dirt bike. Start by removing the seat and the side panels by simply unscrewing th…

How to Replace the Coolant in a Honda CB 500F

In this short and simple guide, you will find step-by-step instructions on how to drain and refill the coolant in a Honda CB 500F motorcycle. First, place your motorcycle on a stand and start by unscrewing the drain screw for the antifreeze, located on the water pump casing; let the fluid drain into a container for about ten minutes. Next, unscrew the radiator cap to allow the fluid to drain more quickly; finally, refill with new fluid suitable for your radiator, filling until you reach the maximum level mark!

Watch the video!


by ScegliAuto

More videos