Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Ktm
    3. : Ktm 250

How to Replace the Spark Plug on a KTM Dirt Bike

Model: Ktm Ktm 250
Part: Spark plugs

Video tutorial

Hello, today you will focus on replacing the spark plug on your KTM dirt bike. Start by removing the seat and the side panels by simply unscrewing the relevant fixing screws.

Next, disconnect the cable that connects the spark plug to the ignition coil. At this point, using the appropriate spanner, unscrew the spark plug from the cylinder head.

Once done, you will be able to remove the spark plug. To fit the new spark plug on your KTM dirt bike, follow the same steps in reverse order, successfully completing the replacement.


Updated on 16 September 2026 by ScegliAuto


Related tutorials

How to Replace Engine Oil and Oil Filter on a KTM
How to Replace Engine Oil and Oil Filter on a KTM
Ktm 250 In this short video, you will see step by step how to change the engine oil on your KTM 250. First, take a 13 mm socket spanner and a container for t…

How to Replace the Coolant in a Honda CB 500F

In this short and simple guide, you will find step-by-step instructions on how to drain and refill the coolant in a Honda CB 500F motorcycle. First, place your motorcycle on a stand and start by unscrewing the drain screw for the antifreeze, located on the water pump casing; let the fluid drain into a container for about ten minutes. Next, unscrew the radiator cap to allow the fluid to drain more quickly; finally, refill with new fluid suitable for your radiator, filling until you reach the maximum level mark!

Watch the video!


by ScegliAuto

More videos