Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Oil Filter on the KTM EXC-F 500

Model: Ktm Exc F 500
Part: Engine oil

Video tutorial

Today, we will go through the instructions to perform the regular maintenance service by changing the engine oil and oil filter on the KTM EXC-F 500 enduro bike. First, place the bike on a stand and begin unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes.

Next, unscrew the screws of the oil filter cover, removing and replacing the cartridge with a new one, as shown in the video. At this point, unscrew the filler cap and pour in the new engine oil, ensuring it meets the appropriate specifications.


Posted on 7 April 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on the KTM EXC-F 500
How to Change the Engine Oil on the KTM EXC-F 500
Exc F 500 .. the routine maintenance service on the KTM EXC-F 500 enduro bike. First, remove the oil drain bolt located under the engine, allowing the oil to drain.. …
How to Perform the First Service on the KTM EXC-F 500
How to Perform the First Service on the KTM EXC-F 500
Exc F 500 .. the engine oil and oil filter on the KTM EXC-F 500 enduro bike, in simple steps. First, warm up the engine for a few minutes and unscrew the oil drain.. …
How to Change the Engine Oil on the KTM Exc 500
Exc F 500 Learn how to perform the routine maintenance service by changing the engine oil and oil filter on a KTM Exc 500 enduro bike. First, unscrew the oil d…

How to Replace the O-ring on the Clutch Rod of the LML Star?

To replace the O-ring on the clutch rod of the LML Star, lift the bike to loosen the side panel located near the rear wheel. Next, unscrew all the screws securing the rear wheel and the corresponding transmission cover: by removing the clutch, you will be able to locate the rod positioned behind it. This rod can now be removed from its housing by unscrewing the fastening screws; after the old rod has been removed, slide out the O-ring, replace it with a new one, and reassemble all previously removed components.

Watch the video!


by ScegliAuto

More videos