Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video, you will see how to reset the service light on the KTM Adventure: turn on the ignition, and the service warning will appear on the screen. Go to "settings" and then press the "up/down" buttons simultaneously for about 4 seconds. The "service interval" menu will open. Use the right button to adjust the mileage, which will increase by 500 km with each press (up to a maximum of 10,000 km) and then set the time up to a maximum of 24 months; press "back" to exit. Turn off and restart to check that the warning has disappeared. If the light does not turn off, a reset with an OBD2 tool may be necessary.

Posted on 8 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil service on the KTM Adventure 1190?
How to reset the oil service on the KTM Adventure 1190?
Adventure 1190 In this tutorial, you will see how to reset the oil service on the KTM Adventure 1190, a very simple and quick operation that should only be done aft…
How to Remove the Fuel Tank from a KTM 1190 Adventure
How to Remove the Fuel Tank from a KTM 1190 Adventure
Adventure 1190 In this video, we will see the instructions to remove the fuel tank from the KTM 1190 Adventure in simple steps. First, remove the seat from your bik…
How to Replace the Coolant in the KTM Adventure 1190
How to Replace the Coolant in the KTM Adventure 1190
Adventure 1190 This brief guide explains how to drain and replace the coolant in the KTM Adventure 1190, as well as the 1290. First, place the bike on its centre st…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos