Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Ktm Ktm Exc

To replace the master cylinder on the KTM 525 Exc, first, position the bike securely and stably so you can work safely. Next, remove the clutch lever and the corresponding piston by unscrewing the various bolts that secure it in place using the appropriate tool (as shown in the video images). Also, remove the top cover of the master cylinder body. After this, use a special pliers to remove the rubber protection, the retaining clip, and the gasket found at the inlet of the master cylinder body. Now you can slide the cylinder, along with the corresponding spring, out of the body and proceed with the replacement of the cylinder along with all the parts you have removed. Reassemble everything following the operations shown in the images but in reverse order.

Updated on 10 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace Brake Pads on a KTM EXC
How to Replace Brake Pads on a KTM EXC
Ktm Exc Today, I will show you how to replace the brake pads on our KTM EXC motorcycle. First, for this specific model, I recommend not detaching the brake c…
How to Change Engine Oil and Filters on a KTM 400 EXC
How to Change Engine Oil and Filters on a KTM 400 EXC
Ktm Exc In this video, you will learn how to replace the oil and filters on your KTM 400 EXC. First, remove the plastic cover protecting the sump. Undo the b…
How to replace the spark plug of the KTM 300
How to replace the spark plug of the KTM 300
Ktm Exc Today we will show you how to replace the spark plug on a KTM 300 motorcycle in order to maintain optimal engine performance. Before starting with th…

How to Replace the Rear View Mirror on a Honda Forza

To replace the rear view mirror on a Honda Forza, use a screwdriver to lever under the front cover of the fairing to detach it. Underneath, you will find the bolts securing the windscreen and its support: by removing these, you can access the screws holding the rear view mirror. Unscrew these screws and disconnect the connectors attached to the mirrors, allowing you to completely remove them and install the new ones: these must be connected to the connectors, positioned in their place, and secured with the appropriate bolts.

Watch the video!


by ScegliAuto

More videos