Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Ktm
    3. : Duke200

Engine Oil and Oil Filter Replacement for KTM Duke 200

Model: Ktm Duke200
Part: Engine oil

Video tutorial

This guide explains how to replace the engine oil and oil filter on a KTM Duke 200. Obtain 2 litres of Motul 7100 SAE 10W40 oil and an HIFLO HF155 oil filter. Position the bike on its side stand.

Start the engine, allow it to reach temperature, and then switch off. Place a container for the used oil underneath the engine. Use a ratchet and a 14mm socket to remove the oil drain plug located at the bottom of the engine casing, on the left side.

Use pliers to extract the oil filter cartridge. Allow the oil to drain and clean the drain plug and filter cartridge thoroughly.

Refit the drain plug. Use a ratchet and a 10mm socket to remove the three side screws from the oil filter cover located on the left side of the engine, right side of the casing.

Remove the filter cartridge and replace it with the new one. Open the oil filler cap located on the left side of the engine casing and pour in oil according to the level inspection hole. Start the engine for one minute and switch off. Check the oil level.


Updated on 10 March 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil of the KTM Duke 200
How to Change the Engine Oil of the KTM Duke 200
Duke 200 To change the engine oil of the KTM Duke 200, first loosen the oil drain plug located at the bottom of the bike, on the left side. Once the plug is l…
Replace the Engine Oil and Oil Filter on the Ktm Duke 125
Replace the Engine Oil and Oil Filter on the Ktm Duke 125
Duke 125 This guide illustrates how to perform the routine maintenance service by replacing the engine oil and oil filter on the Ktm Duke 125 motorcycle. Firs…
How to Replace the Air Filter on a KTM Duke 200
Duke 200 These simple steps will show you how to remove and replace the air filter on a KTM Duke 200. First, place the motorcycle on its stand and begin by re…

How to change the transmission oil on the Honda PCX 150 scooter?

In this tutorial, you will see how to change the transmission oil on the Honda PCX 150 scooter, a very simple and quick operation. First, ensure the engine is completely cold, then locate the three bolts at the end of the casing and position a container underneath them. Next, remove the two inner bolts using a 12 mm socket, clean them of any dirt, and allow all the oil in the system to drain out. At this point, tighten the lower bolt and, using a pump or syringe, add new oil through the upper hole.

Watch the video!


by ScegliAuto

More videos