|
Do it yourself
| |||
| ||||
Model: Ktm Exc 125
This guide provides information on how to remove and replace the rear wheel bearing on the KTM EXC 125 enduro bike. First, place the bike on a stand and start unscrewing the central axle of the wheel, then disconnect the drive chain; next, disconnect the brake caliper from the disc, thereby removing the rear wheel. At this point, use a special extractor tool to remove the bearing from the wheel, replacing it with the new original one; reassemble the bearing and rear wheel, finally adjusting the chain.
Posted on 5 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Exc 125
In this video tutorial, you will learn how to remove and replace the rear swingarm and rear wheel bearing on the KTM EXC 125 enduro bike. First, remo…
Exc 125
In this video, see the instructions for removing and replacing the chain, sprocket, and pinion on a KTM EXC 125. First, position the bike on a stand …
Exc 125
Before you begin, position your KTM EXC 125 upright. Start by unfastening and removing the left rear side cover by simply pulling it towards you. Thi…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.025
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
