|
Do it yourself
| |||
| ||||
Model: Ktm Exc 125
In this video tutorial, you will learn how to remove and replace the rear swingarm and rear wheel bearing on the KTM EXC 125 enduro bike. First, remove the rear wheel and the rear fork of your bike; then, heat the area around the bearing well, and use a puller to remove it, as shown in the video. Next, fit the new bearing into place until it is seated; subsequently, replace the rear wheel bearing, following the video tutorial to the end!
Updated on 5 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Exc 125
To replace the main bearings of the KTM EXC 125, you need to completely disassemble the two crankcase halves, allowing easy access to the components …
Exc 125
This guide provides information on how to remove and replace the rear wheel bearing on the KTM EXC 125 enduro bike. First, place the bike on a stand …
Exc 125
In this video, see the instructions for removing and replacing the chain, sprocket, and pinion on a KTM EXC 125. First, position the bike on a stand …
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.007
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
