Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in the KTM RC 390?

Model: Ktm Rc 390
Part: Engine oil

Video tutorial

In this tutorial, learn how to change the engine oil in the KTM RC 390, a very simple and quick operation. First, ensure the engine is cool enough to operate safely, then position a container beneath the bike, locate the bolts for the two drain holes, and unscrew them using a socket spanner.

Allow all the oil in the system to drain out, remove the two secondary filters, and clean them of any dirt. Now, open the cap of the main filter, insert the replacement, reassemble everything, and pour in the necessary amount of oil through the designated upper hole.


Posted on 14 May 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in a KTM RC 390?
How to Change the Engine Oil in a KTM RC 390?
Rc 390 As seen in this tutorial, changing the engine oil in a KTM RC 390 is an extremely simple and quick operation. First, wait for the engine to cool down…
How to Change the Engine Oil in a KTM RC 390?
How to Change the Engine Oil in a KTM RC 390?
Rc 390 In this tutorial, you will see how to change the engine oil in a KTM RC 390, a very simple and quick operation to be performed every 12 months. First…
How to Change the Engine Oil in the KTM RC 390
How to Change the Engine Oil in the KTM RC 390
Rc 390 .. In this tutorial, you will see how to change the engine oil in the KTM RC 390, a very simple and quick operation. First, wait until.. …

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos