Do it yourself
Frequently asked questions about cars and motorcycles
  1. Motorcycles
  2. :
  3. Ktm
  4. : 450 Exc

Service on KTM 450 EXC

Model: Ktm 450 Exc

Video tutorial

It is recommended to use 10W50 oil for this engine. Position the motorcycle upright on a centre stand and check the oil level using the sight glass.

Remove the bash plate and start the engine for a couple of minutes to warm the oil. Remove the oil cap, unscrew the lower filter and the side filter, cleaning them well with WD40 if you do not intend to replace them. Remove the two upper filters, long and short, and clean these as well.

Refit the lower and side filters, tightening to 10 Nm and 15 Nm respectively. Now refit the upper filters, lubricating the O-rings and tightening to 6 Nm.


Updated on 29 March 2026 by ScegliAuto


Related tutorials

450 Exc Changing the engine oil in a KTM 450 is an extremely simple and quick task. First, ensure the engine is cool enough to operate safely. Then, position…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos