Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Fuel Tank from a KTM Duke 390

Model: Ktm Duke 390
Part:

This video is currently unavailable

Today, we will see how to remove the tank from a KTM Duke 390 in simple steps. First, remove the rear seat and unscrew the fastening screws of the rider's seat, as shown in the video.

Next, use a star screwdriver to unscrew the screws of the tank and unscrew the screws of the tank cap (there are a total of three screws, the others are fake): then unscrew the additional upper screws of the tank and those on the sides. Finally, lift the tank and remove the fuel hose, along with the electrical connector of the reserve sensor!


Updated on 30 March 2026 by ScegliAuto


Related tutorials

How to Remove the Fuel Tank from the KTM Duke 390
How to Remove the Fuel Tank from the KTM Duke 390
Duke 390 Today, we will go through the instructions to remove and replace the fuel tank on the KTM Duke 390 motorcycle. First, place the bike on a stand and s…
Replacement of Air Filter on KTM Duke 250/390 2017
Replacement of Air Filter on KTM Duke 250/390 2017
Duke 390 Descriptive guide for replacing the air filter on a 2017 KTM DUKE 250/390. Obtain an air filter KTM p. N.90106015000. Position the motorcycle on the …
How to Remove and Replace the Spark Plug on the KTM Duke 390
How to Remove and Replace the Spark Plug on the KTM Duke 390
Duke 390 Today, you will learn the procedure for removing and replacing the engine spark plug on the KTM Duke 390 in simple and quick steps. First, place the …

How to Reset the Service Light on the Gilera Nexus 500

This video shows the procedure to reset the service light on the Gilera Nexus when the light remains on after a service. The procedure is straightforward and takes less than a minute. To reset the light, press the mode button and the odo/set button simultaneously. While holding them down, turn the ignition key to the ON position. Once the instruments are on, release the buttons and press the mode button once. The maintenance light will illuminate; hold the mode button for a few seconds to reset it.

Watch the video!


by ScegliAuto

More videos