Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
After removing the side fairings, disconnect the connector for the air temperature sensor, as shown in the video. Unscrew the eight 6 mm screws securing the cover above the air filter. Simply pull out the filter frame and remove the filter. If the filter is quite dirty as suspected, proceed with the replacement: take out the old filter from the plastic frame and insert the new filter into the old frame, which does not need replacing. Reinsert everything and reverse the steps for reassembly: screw the cover back on, reconnect the connector, and fit the fairings.

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the air filter on the KTM Super Adventure?
How to replace the air filter on the KTM Super Adventure?
Super Adventure To replace the air filter on the KTM Super Adventure, unscrew the bolts securing the fuel tank and the seat. Once these bolts are loosened, remove bo…
How to Replace the Spark Plug on a KTM Super Adventure
How to Replace the Spark Plug on a KTM Super Adventure
Super Adventure To replace the spark plug on the KTM Super Adventure, loosen the screws that secure the plate immediately behind the front wheel, which is located un…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos