Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the spark plug on the KTM Super Adventure, loosen the screws that secure the plate immediately behind the front wheel, which is located under the radiator. Once removed, also loosen the screws securing the radiator, disconnect it, and access its rear. This will allow you to extract the spark plug from its housing by disconnecting it from its connector and inserting a new replacement. After installation, reinsert all removed components and check that the vehicle operates correctly.

Updated on 30 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the air filter on the KTM Super Adventure?
How to replace the air filter on the KTM Super Adventure?
Super Adventure To replace the air filter on the KTM Super Adventure, unscrew the bolts securing the fuel tank and the seat. Once these bolts are loosened, remove bo…
Air Filter Replacement on KTM Super Adventure
Air Filter Replacement on KTM Super Adventure
Super Adventure After removing the side fairings, disconnect the connector for the air temperature sensor, as shown in the video. Unscrew the eight 6 mm screws secur…

How to Replace the Spark Plug on a Piaggio Vespa SXL 125 Scooter?

In this tutorial, you will see how to replace the spark plug on a Piaggio Vespa SXL 125 scooter, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by unscrewing the indicated screw and opening the small lower door, then disconnect the connector from the spark plug and begin unscrewing it using a long 16 mm socket. Once completely removed, insert the replacement and tighten it without applying excessive force, as it could be damaged. Finally, reconnect the connector and reposition the door.

Watch the video!


by ScegliAuto

More videos