|
Do it yourself
| |||
| ||||
Model: Ktm Smc 690
In today's video, we will see how to disassemble and replace the drive sprocket on a KTM SMC 690, following the instructions below. First, remove the side cover by unscrewing the fastening screws with an 8 mm spanner; then remove the locking pin from the nut using something sharp like a flat screwdriver. Once removed, you can unscrew the sprocket nut while locking the crankshaft, and take it off as shown in the video. Clean the area around the gear and grease it before reassembling the sprocket!
Updated on 6 April 2026 by ScegliAuto
Video tutorial
Related tutorials
Smc 690
In today’s video, you will see how to remove and replace the front headlight on a KTM SMC 690 R motorcycle in simple and quick steps. First, unclip t…
Smc 690
Follow these instructions to remove and replace the clutch discs on the KTM SMC 690 motorcycle. First, place your motorcycle on a stand and start uns…
Smc 690
Today, you will learn how to change the engine oil while performing the regular maintenance service on a KTM SMC 690 R. First, unscrew the oil drain …
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.022
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |