Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Exhaust on a KTM SMC 690?

Model: Ktm Smc 690
Part: Exhaust muffler

Video tutorial

To replace the exhaust fitted on the KTM SMC 690, loosen the screws that secure the silencer to its housing, located on the right side of the mudguard: once these screws are removed, you can widen the connecting clamp between the exhaust and the collector.

At this point, you can completely remove the old silencer to install the new one: after installation, secure it with the appropriate screws to the supports and connect it to the exhaust collector to ensure that the new device functions correctly.


Posted on 10 August 2026 by ScegliAuto


Related tutorials

Smc 690 In order to replace the exhaust of the KTM SMC-R 690, you will need to loosen the screws that fix the exhaust terminal to its housing near the rear f…
Smc 690 In this video, we will see the main steps to remove and replace the fuel filter on a KTM SMC 690. First, remove all the petrol from the tank, either …
Smc 690 In today's video, we will see how to disassemble and replace the drive sprocket on a KTM SMC 690, following the instructions below. First, remove the…

How to replace the engine oil and oil filter on a Moto Guzzi V7 Stone

Let’s discover the steps to perform routine maintenance by replacing the engine oil and oil filter on the Moto Guzzi V7 Stone. First, place the motorcycle on its stand and begin to unscrew the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; clean or replace the metal oil filter as shown in the video. At this point, unscrew the oil filler cap and top up the oil; check the level from the side window!

Watch the video!


by ScegliAuto

More videos