|
Do it yourself
| |||
| ||||
Replacing Rear Brake Pads on KTM 390 Adventure
Model: Ktm 390 Adventure
Video tutorial
In this brief video tutorial, see how to disassemble and replace the rear brake pads on a KTM 390 Adventure enduro bike. First, remove the central pin that secures the brake pads using a pair of pointed pliers; to do this, remove the two clips or retaining pins. At this point, you can extract the old brake pads and replace them with new ones of the correct type; clean the inside of the caliper and push the piston back to facilitate the insertion of the new brake pads!
Updated on 16 April 2026 by ScegliAuto
Related tutorials
390 Adventure
To reset the service light on a KTM 390 Adventure, turn on the ignition by inserting the key into the ignition switch. Once the dashboard is illumina…
390 Adventure
If you want to manually reset the service light on the dashboard of your KTM 390 Adventure, carefully read the following guide and follow the steps d…
390 Adventure
In order to replace the air filter of the KTM 390 Adventure, you need to insert the key into the side lock of the seat, so that it can be completely …
|
How to replace the air filter on the Aprilia Tuareg 660?
To replace the air filter on the Aprilia Tuareg 660, loosen the screws securing the panel located at the front of the vehicle, just behind the handlebars. Once these screws are loosened, remove the panel to access the underlying filter. The old filter can be extracted, and a new one can be inserted into its housing. After replacement, cover the filter with the panel and check that the engine is running properly. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.008
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |