Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Coolant on the KTM 250 EXC (2016)

Model: Ktm Exc 250
Part: Antifreeze coolant

Video tutorial

In this video tutorial, you will learn how to replace the coolant or antifreeze on a 2016 KTM EXC 250 in simple and quick steps. First, bleed the cooling system by draining the old fluid; to do this, unscrew the indicated fixing screw of the water pump and let the fluid drain into a container.

At this point, refit the screw and remove the upper fairings of your bike to access the radiator cap; then top up with the new antifreeze, filling to the maximum level!


Updated on 18 April 2026 by ScegliAuto


Related tutorials

How to Replace the Front Wheel on a KTM Exc 250
How to Replace the Front Wheel on a KTM Exc 250
Exc 250 The following steps will guide you through removing and replacing the front wheel on the KTM Exc 250 enduro bike, as well as the Exc 300 and Exc 125 …
How to Replace the Grips on the 2016 KTM EXC 250
How to Replace the Grips on the 2016 KTM EXC 250
Exc 250 In this video tutorial, you will learn how to remove and replace the grips on the 2016 KTM EXC 250, following the instructions below. First, remove t…
How to Replace the Rear Brake Pads on the KTM EXC 250
How to Replace the Rear Brake Pads on the KTM EXC 250
Exc 250 This guide provides instructions to remove and replace the rear brake pads on the KTM EXC 250 enduro motorcycle, as well as the EXC 300 and XC models…

How to Change the Engine Oil and Oil Filter on a Keeway RKF 125

Today, we will go through the steps to perform routine maintenance by changing the engine oil and oil filter on a Keeway RKF 125. First, place the bike on a stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes. Unscrew the screws of the oil filter cover, removing and replacing the cartridge with a new one as shown in the video. At this point, unscrew the filler cap and pour in the new engine oil; start the engine and check that the level is at the maximum mark.

Watch the video!


by ScegliAuto

More videos