Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump Filter on a KTM SX-F 350

Model: Ktm Sx F 450
Part: Fuel filter

Video tutorial

To replace the fuel pump filter on the KTM SX-F 350, remove the seat and disconnect the connector underneath, which is directly connected to the fuel tank. Then disconnect the fuel line located on the side of the bike and loosen the screws securing the fuel tank.

This can then be removed, and by loosening the screws that secure the plate inside, you can extract the pump from inside the tank and remove the filter. The part can now be replaced, and all removed parts can be refitted.


Updated on 27 April 2026 by ScegliAuto


Related tutorials

How to Replace the Battery on the KTM SX-F 450
How to Replace the Battery on the KTM SX-F 450
Sx F 450 To replace the battery on the KTM SX-F 450, loosen the bolts located on the side of the seat to remove it. Once the seat is removed, disconnect the b…
How to Change the Engine Oil and Coolant on the KTM SX-F 450
How to Change the Engine Oil and Coolant on the KTM SX-F 450
Sx F 450 Today, we will see how to perform routine maintenance by changing the engine oil, oil filter, and coolant on the KTM SX-F 450 enduro bike. First, rem…
How to Change the Engine Oil on the KTM SX-F 450
How to Change the Engine Oil on the KTM SX-F 450
Sx F 450 Today, you will learn the procedure for replacing the engine oil and oil filter while performing the routine maintenance service on the KTM SX-F 450 …

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos