Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on a KTM Duke 390.

Model: Ktm Duke 390
Part: Battery

Video tutorial

To replace the battery on a KTM Duke 390, first loosen the screws that secure the seat so that it can be removed, giving access to the components underneath. At this point, the battery can be removed from its housing after disconnecting the terminals and unscrewing the fixing bolts.

After removing the old battery, you can insert a new one by connecting it to the cables and securing it with the appropriate bolts. Once the new battery is installed, you can cover everything with the seat.


Updated on 1 May 2026 by ScegliAuto


Related tutorials

How to Remove the Battery from a KTM Duke 390
How to Remove the Battery from a KTM Duke 390
Duke 390 Before you begin, position your KTM Duke 390 on its stand. Start by removing the seat using the motorcycle key, then unclip and take it off. Next, pu…
How to Replace the Battery of the KTM Duke 390?
How to Replace the Battery of the KTM Duke 390?
Duke 390 To replace the battery of the KTM Duke 390, insert the key into the lock located under the seat on the left side. This will release the seat from its…
How to Replace the Battery on the KTM Duke 390?
How to Replace the Battery on the KTM Duke 390?
Duke 390 To replace the battery on the KTM Duke 390, loosen the screws securing the seat so that it can be completely removed, giving access to the components…

How to Reset the Service Light on the Gilera Nexus 500

This video shows the procedure to reset the service light on the Gilera Nexus when the light remains on after a service. The procedure is straightforward and takes less than a minute. To reset the light, press the mode button and the odo/set button simultaneously. While holding them down, turn the ignition key to the ON position. Once the instruments are on, release the buttons and press the mode button once. The maintenance light will illuminate; hold the mode button for a few seconds to reset it.

Watch the video!


by ScegliAuto

More videos