Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Oil Filter Replacement for the KTM EXC 450

Model: Ktm Exc 450
Part: Engine oil

Video tutorial

In this video, we will see how to carry out the routine maintenance service for the oil change on the KTM EXC 450 enduro bike. First, remove the metal guard located under the engine; then unscrew the oil drain bolt found underneath the engine, allowing it to drain into a container for about ten minutes.

At this point, unscrew the screws of the filter cover to remove the cartridge and replace it with a new one; finally, unscrew the oil filler cap, ensuring it is the correct type (as specified in the user and maintenance manual).


Updated on 7 May 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Oil Filter on a KTM EXC 450?
How to Change the Engine Oil and Oil Filter on a KTM EXC 450?
Exc 450 In today's video tutorial, you will see the main steps to change the engine oil and oil filter on the KTM EXC 450 enduro bike. First, remove the meta…
How to change the engine oil of a KTM EXC 450
Exc 450 Today, let's discover the procedure for changing the engine oil and oil filter of the KTM EXC 450 enduro bike. First, place your bike on a stand and …
How to Change the Engine Oil on a KTM EXC 450
How to Change the Engine Oil on a KTM EXC 450
Exc 450 In this brief video, we will see the steps to change the engine oil and oil filter, performing the regular maintenance service on the KTM EXC 450. Fi…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos