Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fuel Tank from a KTM XCF 250?

Model: Ktm Xcf 250
Part:

Video tutorial

To replace the fuel tank on a KTM XCF, you need to loosen the bolts securing the seat using a Torx key. Once the seat is removed, disconnect the connector from the fuel pump. Next, disconnect the fuel hose on the side of the bike by simply pulling it off by hand.

At this point, remove the fairings located on either side of the tank, remove its central securing screw, and extract it from its housing after also disconnecting the breather hose. After completing all these steps, you will be able to install a new tank.


Updated on 10 May 2026 by ScegliAuto


Related tutorials

How to Remove the Plastics on a KTM XCF 250
How to Remove the Plastics on a KTM XCF 250
Xcf 250 Today's guide will show you how to remove and replace the plastic fairings on the KTM XCF 250 enduro bike, as well as the SXF 250. First, place the b…
How to Change the Engine Oil of the KTM XCF-W 250
How to Change the Engine Oil of the KTM XCF-W 250
Xcf 250 Today, follow this guide on how to perform the routine maintenance oil change on the KTM XCF-W 250 enduro bike. First, warm up the engine for a few m…
How to Change the Engine Oil in a KTM SXF - XCF 250
How to Change the Engine Oil in a KTM SXF - XCF 250
Xcf 250 In this guide, we will go through the steps to perform the routine maintenance oil change for the KTM XCF 250, as well as the SXF and EXC models. Fir…

How to Replace the Brake and Clutch Levers on a Kawasaki Z750

Briefly follow these instructions to remove and replace the front brake and clutch levers on the Kawasaki Z750 motorcycle. First, place your motorcycle on a stand and start by unscrewing the pin for the front brake lever, loosening the nut located at the bottom; remove and replace the lever with a new one, securing it properly and finally adjusting the lever travel as shown in the video. Similarly, replace the clutch lever by unscrewing the pin; in this case, attach the metal cable to the lever and make the adjustment using the adjuster!

Watch the video!


by ScegliAuto

More videos