Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Ktm
    3. : Xc W 125

How to replace the gearbox oil on a KTM XC-W 125

Model: Ktm Xc W 125
Part: Transmission fluid

Video tutorial

In today's tutorial video, you will learn how to change the transmission oil on the KTM XC-W 125 enduro bike in simple and quick steps. First, warm up the engine for a few minutes and begin to unscrew the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes.

Unscrew the filler cap to allow the oil to flow out more quickly. At this point, top up with the correct type of oil that has the same viscosity, filling to the level indicated in the owner's manual.


Updated on 21 May 2026 by ScegliAuto


Related tutorials

How to change the oil in the KTM TBI 125 gearbox
How to change the oil in the KTM TBI 125 gearbox
Tbi 125 Changing the transmission oil and performing routine maintenance is a simple and quick process that anyone can do; let's see how to do it on the KTM …
Changing the transmission oil on the KTM EXC 125
Changing the transmission oil on the KTM EXC 125
Exc 125 Today, we will go through the steps to perform routine maintenance by changing the transmission oil on the two-stroke enduro bike KTM EXC 125. First,…
How to Replace the Gearbox Oil on the KTM SX 85?
How to Replace the Gearbox Oil on the KTM SX 85?
Sx 85 To replace the gearbox oil on the KTM SX 85, you need to loosen the drain plug of the gearbox, which is located below the casing on the right side of…

How to change the transmission oil on the Honda PCX 150 scooter?

In this tutorial, you will see how to change the transmission oil on the Honda PCX 150 scooter, a very simple and quick operation. First, ensure the engine is completely cold, then locate the three bolts at the end of the casing and position a container underneath them. Next, remove the two inner bolts using a 12 mm socket, clean them of any dirt, and allow all the oil in the system to drain out. At this point, tighten the lower bolt and, using a pump or syringe, add new oil through the upper hole.

Watch the video!


by ScegliAuto

More videos