Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Speedometer and Clock Battery on the KTM EXC F 500

Model: Ktm Exc F 500
Part: Clock

Video tutorial

In this tutorial, you will learn how to disassemble and replace the battery for the speedometer and clock on the KTM EXC F 500 enduro bike. First, remove the front headlamp by unscrewing the fixing screws of the two brackets; then unscrew the screws of the instrument panel to access the lower part, allowing you to remove the old battery, as shown in the video.

At this point, replace the old battery with a new one of the correct type (in this case, a CR 2430 3V); insert it the right way round into the instrument panel and apply the reverse procedure for reassembly!


Updated on 24 May 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil of the Ktm Exc 500
How to Change the Engine Oil of the Ktm Exc 500
Exc F 500 In this brief and simple guide, we will outline the procedure to change the engine oil and oil filter of the Ktm Exc 500 enduro bike. First, place th…
How to change the engine oil on a KTM EXC 500 2022
How to change the engine oil on a KTM EXC 500 2022
Exc F 500 In this tutorial, you will learn how to perform the first service of the routine maintenance for the oil change on the KTM EXC 500 enduro bike, in si…
How to Remove the ECU from the KTM EXC 500
How to Remove the ECU from the KTM EXC 500
Exc F 500 In today's tutorial, you will learn how to remove and replace the engine control unit (ECU) of the KTM EXC 500 enduro bike by following these simple …

How to Replace the O-ring on the Clutch Rod of the LML Star?

To replace the O-ring on the clutch rod of the LML Star, lift the bike to loosen the side panel located near the rear wheel. Next, unscrew all the screws securing the rear wheel and the corresponding transmission cover: by removing the clutch, you will be able to locate the rod positioned behind it. This rod can now be removed from its housing by unscrewing the fastening screws; after the old rod has been removed, slide out the O-ring, replace it with a new one, and reassemble all previously removed components.

Watch the video!


by ScegliAuto

More videos