|
Do it yourself
| |||
| ||||
Model: Ktm Duke 390
This guide provides instructions on how to replace the coolant in the KTM Duke 390 in simple and quick steps. First, place your bike on a stand and begin by removing any plastic fairing located under the engine by unscrewing the screws. Next, unscrew the drain screw on the water pump, allowing the fluid to drain into a container, as shown in the video. At this point, unscrew the radiator cap and top up using the appropriate antifreeze for your radiator, filling to the correct level!
Updated on 27 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Duke 390
.. In this short and simple guide, discover how to replace the coolant in the KTM Duke 390 motorcycle. First, place your bike on a stand and start.. …
Duke 390
In this video, you will see how to replace the coolant or antifreeze on a KTM Duke 390, following the instructions below. First, remove the side plas…
Duke 390
In today's tutorial video, you will see the instructions for replacing the rear brake fluid of the KTM Duke 390, as well as the 125. First, remove th…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.073
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
