Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Fork Oil on a KTM EXC-F 500

Model: Ktm Exc F 500
Part:

Video tutorial

In this video tutorial, you will learn how to disassemble and replace the fork oil on the KTM EXC-F 500 enduro bike in simple and quick steps. First, place your bike on a stand and start loosening the two screws on the top of the fork.

Then, use the appropriate spanner to unscrew the top part of the fork to remove it from the frame, as shown in the video. At this point, remove the fork leg and drain the old oil, replacing it with the new oil. Finally, reassemble everything by following the reverse procedure!


Updated on 27 May 2026 by ScegliAuto


Related tutorials

Exc F 500 .. the routine maintenance service on the KTM EXC-F 500 enduro bike. First, remove the oil drain bolt located under the engine, allowing the oil to drain.. …
Exc F 500 In this brief and simple guide, we will outline the procedure to change the engine oil and oil filter of the Ktm Exc 500 enduro bike. First, place th…
Exc F 500 Learn how to perform the routine maintenance service by changing the engine oil and oil filter on a KTM Exc 500 enduro bike. First, unscrew the oil d…

How to Replace the Rear Brake Pads on a Derbi Senda 125?

To replace the rear brake pads on a Derbi Senda 125, loosen the nut that secures the central axle of the rear wheel so that it can be completely removed from its housing. Once the wheel is removed, you can slide out the pin that secures the pads inside the brake caliper and remove them from their housing. After the old pads have been removed, insert the new replacement parts, securing them with the pin. Finally, reinstall the rear wheel, positioning it at the end of the swingarm.

Watch the video!


by ScegliAuto

More videos