|
Do it yourself
| |||
| ||||
|
Model: Ktm Super Duke 1290 R
Follow the main instructions on how to drain and replace the coolant or antifreeze in the KTM Super Duke 1290 motorcycle. First, place your bike on a stand and start unscrewing the bolt located on the left side of the engine casing to drain the coolant, as shown in the video. Next, unscrew the radiator cap and top up with the new fluid (suitable for your radiator); then start the engine to circulate the fluid, topping up if necessary!
Updated on 31 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Super Duke 1290 R
In today's video, we'll see how to remove the rear wheel from a KTM Super Duke 1290 R. To remove it, first take off the retaining ring found on the w…
Super Duke 1290 R
This tutorial shows how to reset the service light on a KTM Super Duke 1290 R, a very simple and quick operation. Before proceeding, ensure that you …
Super Duke 1290 R
To replace the chain on a KTM Super Duke 1290 R, first loosen the bolts securing the cover protecting the sprocket on the left side of the bike: afte…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.067
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
