Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Ktm
    3. : 890 Duke R

How to Remove the Seat on the KTM 890 Duke R?

Model: Ktm 890 Duke R
Part:

Video tutorial

In this tutorial, see how to remove the seat on the KTM 890 Duke R, a very simple and quick operation. You will only need a 10mm socket wrench.

First, unclip the rear tail fairing, then unscrew the two bolts underneath it with the socket wrench. Once done, grab the seat and remove it from the frame.

To fit the replacement, simply follow the reverse procedure, ensuring to tighten the two fixing bolts properly. To refit the fairing, just secure it in the appropriate clips.


Updated on 3 June 2026 by ScegliAuto


Related tutorials

How to Replace the Exhaust on a KTM Duke 890 R?
How to Replace the Exhaust on a KTM Duke 890 R?
Duke 890 R To replace the exhaust on the KTM Duke 890 R, loosen the screws that secure the exhaust terminal to its housing on the right side of the bike near th…
How to Reset the Oil Service Light on the KTM Duke 890?
How to Reset the Oil Service Light on the KTM Duke 890?
Duke 890 R In this tutorial, you will learn how to replace the engine oil in the KTM Duke 890, a very simple and quick operation. First, ensure the engine is su…
How to Replace the Air Filter on a KTM Duke 890 R
How to Replace the Air Filter on a KTM Duke 890 R
Duke 890 R Today, you will see the instructions to remove and replace the engine air filter on the KTM Duke 890 R in simple and quick steps. First, place your b…

How to change the transmission oil on the Honda PCX 150 scooter?

In this tutorial, you will see how to change the transmission oil on the Honda PCX 150 scooter, a very simple and quick operation. First, ensure the engine is completely cold, then locate the three bolts at the end of the casing and position a container underneath them. Next, remove the two inner bolts using a 12 mm socket, clean them of any dirt, and allow all the oil in the system to drain out. At this point, tighten the lower bolt and, using a pump or syringe, add new oil through the upper hole.

Watch the video!


by ScegliAuto

More videos