Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Exhaust on a KTM Duke 890 R?

Model: Ktm Duke 890 R
Part: Exhaust muffler

Video tutorial

To replace the exhaust on the KTM Duke 890 R, loosen the screws that secure the exhaust terminal to its housing on the right side of the bike near the mudguard: once the securing screws are loosened, you can widen the ring that connects the exhaust to the collector so that it can be completely removed from its seat.

This will allow you to insert the new replacement part, connecting it to the collector and securing it to the mudguard to ensure everything functions correctly.


Updated on 22 September 2026 by ScegliAuto


Related tutorials

How to Replace the Tyres on the KTM Duke 890 R
How to Replace the Tyres on the KTM Duke 890 R
Duke 890 R In today's tutorial video, you will see how to remove the wheels and replace the tyres on the KTM Duke 890 R. First, place your motorcycle on a stand…
How to Reset the Oil Service Light on the KTM Duke 890?
How to Reset the Oil Service Light on the KTM Duke 890?
Duke 890 R In this tutorial, you will learn how to replace the engine oil in the KTM Duke 890, a very simple and quick operation. First, ensure the engine is su…
How to Install Heated Grips on the KTM Duke 890
How to Install Heated Grips on the KTM Duke 890
Duke 890 R Today, discover the steps to remove and replace the grips with heated ones on the KTM Duke 890. First, place your bike on a stand and start by removi…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos