Do it yourself
Frequently asked questions about cars and motorcycles

Model: Ktm Duke 690
Part:

In today's tutorial video, you will see the steps to remove and replace the brake and clutch levers on the KTM Duke 690 motorcycle. First, place your bike on a stand and start by removing the clutch lever; to do this, undo the pivot bolt using a spanner and a screwdriver, as shown in the video. At this point, disconnect the clutch lever cable, allowing you to install the new one. Next, remove and replace the front brake lever in the same way, then adjust the lever travel as needed.

Updated on 9 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Duke 690 In this video tutorial, we will see how to change the engine oil and oil filter on a KTM Duke 690, performing the regular maintenance service. First,…
Duke 690 In this tutorial, you will learn how to remove and replace the oil filter, change the engine oil, and perform the regular maintenance service on a KT…
Duke 690 In today's tutorial video, you will learn how to remove and replace the spark plugs of the KTM Duke 690 engine by following these simple steps. First…

How to Reset the Engine Oil Light on a Yamaha XMax 250

This short video demonstrates the procedure to reset the engine oil light on a Yamaha XMax 250 scooter. The operation is very simple and quick; first, insert the motorcycle key into the designated slot and turn it to the first position to power on the instrument panel without starting the vehicle. At this point, you will see the light on the display; simply press the "oil change" button located at the centre of the motorcycle's speedometer and hold it until the light stops flashing. The operation will then be complete; to verify success, turn off and then turn on the instrument panel.

Watch the video!


by ScegliAuto

More videos