Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Number Plate Holder on a KTM Duke 690

Model: Ktm Duke 690
Part:

Video tutorial

To replace the number plate holder on a KTM Duke 690, you need to loosen the screws that secure it to its housing: these screws are located on both sides of the rear mudguard, and once loosened, you can detach the number plate holder from its position.

At this point, unscrew the screws that hold the number plate onto its bracket, so you can transfer the plate to the new number plate holder.

This can now be positioned at the rear of the bike and secured with screws on the sides of the mudguard.


Updated on 24 October 2026 by ScegliAuto


Related tutorials

Replacing the Front Headlight Bulb on a KTM Duke 690
Replacing the Front Headlight Bulb on a KTM Duke 690
Duke 690 In this video, see how to dismantle and replace the front headlight bulb on a KTM Duke 690 in simple steps. First, remove the front headlight; to do …
How do you replace the motor oil in the KTM Duke 690?
How do you replace the motor oil in the KTM Duke 690?
Duke 690 To ensure that the oil change of the KTM Duke 690 takes place, you will need to unscrew the drain plug of the oil pan located in the central lower pa…
How to replace the spark plug in a KTM Duke 690?
How to replace the spark plug in a KTM Duke 690?
Duke 690 In this tutorial, you will see how to replace the spark plug in a KTM Duke 690, a very simple and quick operation. First, ensure the engine is comple…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos