Do it yourself
Frequently asked questions about cars and motorcycles
  1. Motorcycles
  2. :
  3. Ktm
  4. : Xc W 150

How to Perform Routine Maintenance on a KTM XC W 150

Model: Ktm Xc W 150
Part: Engine oil

Video tutorial

This guide explains how to perform routine maintenance by changing the engine oil, oil filter, and air filter on the KTM XC W 150 enduro bike. First, place the bike on a stand and start unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then clean the small oil filter.

Next, top up with new oil suitable for your engine; finally, remove the side plastic fairing to access the air filter for cleaning!


Updated on 16 June 2026 by ScegliAuto


Related tutorials

Sx 150 In this brief video, we will see the steps to remove and replace the brake and clutch levers on a KTM SX 150 enduro bike. First, remove the front bra…
Sx 50 In this video tutorial, learn how to perform the routine maintenance service for the oil change of the transmission of the KTM SX 50 2-stroke. First,…
Duke 690 In this video, you will see how to perform a routine maintenance service by changing the oil and oil filter on a KTM Duke 690. First, warm up the eng…

How to change the transmission oil on the Honda PCX 150 scooter?

In this tutorial, you will see how to change the transmission oil on the Honda PCX 150 scooter, a very simple and quick operation. First, ensure the engine is completely cold, then locate the three bolts at the end of the casing and position a container underneath them. Next, remove the two inner bolts using a 12 mm socket, clean them of any dirt, and allow all the oil in the system to drain out. At this point, tighten the lower bolt and, using a pump or syringe, add new oil through the upper hole.

Watch the video!


by ScegliAuto

More videos