Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Oil in the Gearbox of the KTM SX 50 2T

Model: Ktm Sx 50
Part: Transmission fluid

Video tutorial

In this video tutorial, learn how to perform the routine maintenance service for the oil change of the transmission of the KTM SX 50 2-stroke. First, drain the engine oil by unscrewing the drain bolt located on the side, using a socket spanner; allow the oil to drain into a container for about ten minutes.

Next, unscrew the oil filler cap to pour in the new oil of the correct type; fill it up to the maximum level indicated in the motorcycle's user and maintenance manual!


Updated on 7 May 2026 by ScegliAuto


Related tutorials

How to Replace the Clutch on the KTM SX 50
How to Replace the Clutch on the KTM SX 50
Sx 50 This guide provides instructions on how to dismantle and replace the clutch assembly of the KTM SX 50 enduro bike. First, place the bike on a stand a…
How to change the engine oil on a KTM SX 50
How to change the engine oil on a KTM SX 50
Sx 50 Let’s discover all the steps to perform the routine maintenance oil change on the KTM SX 50cc motorcycle, in simple and quick steps. First, position …
How to Change the Engine Oil on a KTM SX 50
How to Change the Engine Oil on a KTM SX 50
Sx 50 Let's discover in this short and simple guide how to perform the routine maintenance service for changing the oil on the KTM SX 50 enduro bike. First…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos