Do it yourself
Frequently asked questions about cars and motorcycles

Model: Ktm Rc 125
Part: Battery

In this tutorial, see how to replace the battery in the KTM RC 125, a very simple and quick operation. Before proceeding, ensure the key is not inserted for full safety. Start by removing the rider's seat, then locate the strap in the right area of the storage compartment and pull it towards the rear of the bike to unlock the front cover of the tank. Once done, unclip the securing strap, disconnect both terminals starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Updated on 13 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Rc 125 Today, we will discover the instructions that will allow you to remove and replace the battery on a KTM RC 125, following the instructions below. Fir…
Rc 125 In this tutorial, we can see how to adjust the time on the KTM RC 125, an extremely simple and quick operation to be carried out, for example, after …
Rc 125 In this tutorial, you can see how to set the time on the KTM RC 125, a very simple and quick operation to perform after disconnecting the battery or …

How to Replace the Engine Oil and Oil Filter on an Aprilia RSV 1000

This short video will show you how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Aprilia RSV 1000 motorcycle. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew and remove the oil filter, replacing the cartridge with a new one as shown in the video. Finally, unscrew the filler screw and top up by pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos