|
Do it yourself
| |||
| ||||
Model: Ktm Exc 530
To replace the rear mudguard on a KTM EXC 530, you need to loosen the screws that secure it to its housing from underneath; next, loosen the screws that secure it laterally, and then you can proceed to completely remove the seat from the bike. Once the seat is removed, locate the screw underneath in the centre, which must be loosened to fully remove the old mudguard; this can then be replaced with a new one, which should be securely fastened with the appropriate screws.
Updated on 22 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Exc 530
You can replace the air filter on the KTM EXC 530 by loosening the screws that secure the panel on the right side of the bike: once the screws are lo…
Exc 530
You can replace the piston on a KTM EXC 530 by loosening the bolts that secure the engine block to its housing in the central lower part of the frame…
Exc 530
Today, let's go through the procedure for replacing the transmission oil on the KTM EXC 530 enduro bike. First, place the bike on a stand and start b…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.079
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |