Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Air Filter on the KTM Duke 390?

Model: Ktm Duke 390
Part: Air filter

Video tutorial

To replace the air filter on the KTM Duke 390, insert the key into the lock located on the right side of the bike: turning the key will allow you to detach the seat from its housing, granting access to the components underneath. Here, you will find the air filter protection panel, which must be removed by loosening its fixing bolts: this will enable you to pull out the old air filter and replace it with a new one, then reassemble all removed components.


Updated on 25 July 2026 by ScegliAuto


Related tutorials

Duke 390 Before you can start, position your KTM Duke 390 on its side stand. Begin by removing the passenger seat using the motorcycle key. Next, unclip and r…
Duke 390 Replacing the air filter on the KTM Duke 390 is an extremely simple and quick task. First, open the passenger seat, then remove the rider's seat as w…
Duke 390 In this video tutorial, you will learn how to replace the engine air filter on the KTM Duke 390 in simple and quick steps. First, place the stand on …

How to Reset the Service Light on the Gilera Nexus 500

This video shows the procedure to reset the service light on the Gilera Nexus when the light remains on after a service. The procedure is straightforward and takes less than a minute. To reset the light, press the mode button and the odo/set button simultaneously. While holding them down, turn the ignition key to the ON position. Once the instruments are on, release the buttons and press the mode button once. The maintenance light will illuminate; hold the mode button for a few seconds to reset it.

Watch the video!


by ScegliAuto

More videos