Do it yourself
Frequently asked questions about cars and motorcycles

Model: Ktm Duke 390
Part:

Follow this guide for instructions on how to remove and replace the chain on the KTM Duke 390 motorcycle by following these simple steps. First, place your motorcycle on a stand and lift the rear wheel off the ground; then, unscrew the central axle to remove the wheel and disconnect the chain, as shown in the video. At this point, disconnect the chain from the sprocket and install the new one; lubricate the chain and refit the rear wheel. Finally, adjust the chain according to the instructions in the owner's manual!

Updated on 26 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Duke 390 Below, we will see the instructions to remove and detach the rear wheel of the KTM Duke 390. First, place the motorcycle on a stand and start looseni…
Duke 390 In this video tutorial, see how to disassemble and replace the sprocket on a KTM Duke 390 motorcycle, as well as on the 125 and 250 models. First, po…
Duke 390 Below is a guide on how to remove and replace the rear wheel on a KTM Duke 390, following the instructions provided. First, place the stand on your b…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos