Do it yourself
Frequently asked questions about cars and motorcycles

How to check and top up the coolant in the Yamaha R6?

Model: Yamaha Yamaha R 6
Part: Antifreeze coolant

Video tutorial

In this tutorial we can see how to check and top up the coolant in the Yamaha R6, an extremely simple and quick operation. First of all, we wait for the engine to be cold enough, then we grab the front wheel and turn it to the right.

We then locate the expansion tank, located just to the right of the radiator, and check that the liquid is between the minimum and maximum marks. If not, we remove the indicated cover, open the cap of the tank and add the necessary amount of liquid to reach the ideal level.


Posted on 10 May 2025 by ScegliAuto


Related tutorials

Yamaha R 6 To replace the exhaust on a Yamaha R6, loosen the bolts that secure the exhaust end can to its mounting on the right side of the bike, near the rear …
Yamaha R 6 You can replace the exhaust on the Yamaha R6 by unscrewing the screws that secure the exhaust terminal to the corresponding housing on the right side…
Yamaha R 6 To replace the clutch on a Yamaha R6, loosen the screws securing the specific cover located on the right side of the bike, just below the correspondi…

How to Set the Clock on the Sym Jet14 125?

To adjust the clock on the Sym Jet14 125, turn on the instrument panel by inserting the ignition key into the corresponding slot. Once the panel is on, press and hold the M button located underneath until one of the numbers on the clock starts flashing. At this point, repeatedly press the S button, also located beneath the panel, to change that number. After making the change, press the M button to move on to the next numbers, finishing by turning off the panel.

Watch the video!


by ScegliAuto

More videos