Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in the KTM Duke 390

Model: Ktm Duke 390
Part: Battery

Video tutorial

In this tutorial, you will learn how to replace the battery in the KTM Duke 390, a very simple and quick operation. First, ensure that the key is not inserted, then remove the passenger seat.

Locate the two indicated bolts and unscrew them using a socket spanner. Next, remove the rider's seat, disconnect both terminals starting with the negative, and take out the old battery from its housing.

At this point, simply insert the replacement battery and reassemble everything by following the reverse procedure, remembering to reconnect the positive terminal first.


Updated on 19 August 2026 by ScegliAuto


Related tutorials

How to Remove the Battery from a KTM Duke 390
How to Remove the Battery from a KTM Duke 390
Duke 390 Before you begin, position your KTM Duke 390 on its stand. Start by removing the seat using the motorcycle key, then unclip and take it off. Next, pu…
How to Reset the "Service" Light on a KTM Duke 390
How to Reset the "Service" Light on a KTM Duke 390
Duke 390 Before starting, the regular service should already have been performed, and then you need to sit on the rider's seat of your KTM Duke 390. Start by …
How to Replace the Battery of the KTM Duke 390?
How to Replace the Battery of the KTM Duke 390?
Duke 390 To replace the battery of the KTM Duke 390, insert the key into the lock located under the seat on the left side. This will release the seat from its…

How to Reset the Service Light on the Gilera Nexus 500

This video shows the procedure to reset the service light on the Gilera Nexus when the light remains on after a service. The procedure is straightforward and takes less than a minute. To reset the light, press the mode button and the odo/set button simultaneously. While holding them down, turn the ignition key to the ON position. Once the instruments are on, release the buttons and press the mode button once. The maintenance light will illuminate; hold the mode button for a few seconds to reset it.

Watch the video!


by ScegliAuto

More videos