Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Perform the First Maintenance on the KTM Exc 300

Model: Ktm Exc 300
Part: Checks and maintenance

Video tutorial

Today, discover the steps to perform the first maintenance on the KTM Exc 300 enduro bike, following the instructions below. First, place the bike on a stand and start draining the transmission oil by removing the drain bolt; let it drain into a container for about ten minutes.

At this point, top up with the correct new oil; next, check the tension of the wheels and the drive chain, and finally inspect the cooling system, including the coolant and the fan!


Updated on 23 August 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on a KTM EXC 300
How to Change the Engine Oil on a KTM EXC 300
Exc 300 Below are the instructions that will allow you to carry out the regular maintenance service by changing the engine oil on the KTM EXC 300 enduro bike…
How to Service the KTM EXC 300
How to Service the KTM EXC 300
Exc 300 In today's tutorial video, we will see how to perform the routine maintenance service, replacing the gearbox oil, checking the wear of the brakes, an…
How to Change the Gear Oil in the KTM EXC-W 300
How to Change the Gear Oil in the KTM EXC-W 300
Exc 300 In this video, you will see how to change the transmission oil while performing the routine maintenance service on the KTM EXC-W 300 enduro bike. Fir…

How to Reset the Service Light on the Gilera Nexus 500

This video shows the procedure to reset the service light on the Gilera Nexus when the light remains on after a service. The procedure is straightforward and takes less than a minute. To reset the light, press the mode button and the odo/set button simultaneously. While holding them down, turn the ignition key to the ON position. Once the instruments are on, release the buttons and press the mode button once. The maintenance light will illuminate; hold the mode button for a few seconds to reset it.

Watch the video!


by ScegliAuto

More videos