Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the remote control battery on the KTM 1290 Super Adventure S?

Model: Ktm 1290 Super Adventure S
Part: Key

Video tutorial

In this tutorial, we will see how to replace the remote control battery on the KTM 1290 Super Adventure S, a very simple and quick operation. For this, you will need a small flat-head screwdriver and a replacement battery of type CR2032. First, insert the tip of the screwdriver into the side slot, then pry along the entire perimeter to unlock the rear cover.

Next, open the inner circular cap, remove the old battery, and insert the replacement, ensuring the correct polarity. Finally, reassemble everything by following the reverse procedure.


Updated on 2 September 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery on a KTM 1290 Super Adventure S?
How to Replace the Remote Battery on a KTM 1290 Super Adventure S?
1290 Super Adventure S In this tutorial, you will see how to replace the remote battery on a KTM 1290 Super Adventure S, a very simple and quick operation. You will need a …
How to Replace the Remote Battery on the KTM 1290 Super Adventure S?
How to Replace the Remote Battery on the KTM 1290 Super Adventure S?
1290 Super Adventure S Replacing the remote battery on the KTM 1290 Super Adventure S, as shown in this tutorial, is an extremely simple and quick task. You will need a rep…
How to replace the exhaust on the KTM 1290 Super Adventure R?
How to replace the exhaust on the KTM 1290 Super Adventure R?
1290 Super Adventure S To replace the exhaust on the KTM 1290 Super Adventure R, you need to loosen the screws that secure the exhaust end can to the appropriate mounts loc…

How to Replace the Drive Belt on a Peugeot Elyseo 50

This guide provides instructions for removing and replacing the drive belt on the Peugeot Elyseo 50 scooter. First, place the scooter on its centre stand and begin by removing the transmission cover by unscrewing the fastening screws located on the sides; then remove the fan and clutch bell by unscrewing the central nuts, as shown in the video. This will allow you to remove the variator and the drive belt, replacing it with a new original one; also replace the rollers if necessary, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos