Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a KTM RC125

Model: Ktm Rc 125
Part: Service warning light

Video tutorial

In this video, we will see how to reset the service light on a KTM RC 125: first, turn on the ignition without starting the engine and press the "mode" button located at the top left of the display. Then, press the "set" button repeatedly until "service reset" appears; continue holding the "set" button until the screen resets and the service reset message disappears.

At this point, you have achieved your goal, and the spanner symbol will appear along with the mileage remaining until the next service.


Updated on 6 September 2026 by ScegliAuto


Related tutorials

How to Remove the Front Wheel of the KTM RC 125
How to Remove the Front Wheel of the KTM RC 125
Rc 125 Discover in this brief and simple guide the instructions on how to remove and replace the front wheel of the KTM RC 125 motorcycle. First, lift the m…
How to Replace the Battery on a KTM RC 135
How to Replace the Battery on a KTM RC 135
Rc 125 Today, we will discover the instructions that will allow you to remove and replace the battery on a KTM RC 125, following the instructions below. Fir…
How to replace the engine oil in the KTM RC 125?
How to replace the engine oil in the KTM RC 125?
Rc 125 Replacing the motor oil in the KTM RC 125, as we can see in this tutorial, is an extremely simple and quick operation. First of all, make sure that t…

How to change the transmission oil on the Honda PCX 150 scooter?

In this tutorial, you will see how to change the transmission oil on the Honda PCX 150 scooter, a very simple and quick operation. First, ensure the engine is completely cold, then locate the three bolts at the end of the casing and position a container underneath them. Next, remove the two inner bolts using a 12 mm socket, clean them of any dirt, and allow all the oil in the system to drain out. At this point, tighten the lower bolt and, using a pump or syringe, add new oil through the upper hole.

Watch the video!


by ScegliAuto

More videos