Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Ktm
    3. : 990rr

How to Replace the Headlamp Bulb on the KTM 990RR?

Model: Ktm 990rr
Part: Headlight bulb

Video tutorial

To replace the headlamp bulb on the KTM 990RR, loosen the screws located on both sides of the headlight assembly. Once these screws are loosened, you can remove the headlight assembly from its housing.

This will allow you to disconnect the connector at the back and remove the bulb from inside the headlamp. Once the old bulb is removed, insert the new one into the headlight assembly.

Finally, reconnect the connector to the headlamp and secure it in place.


Updated on 11 September 2026 by ScegliAuto


Related tutorials

How do you replace the front headlight bulb of the KTM Duke 200?
How do you replace the front headlight bulb of the KTM Duke 200?
Duke 200 The headlight bulb on the KTM Duke 200 can be replaced by loosening the screws that secure the headlight unit to its housing on the front of the moto…
How to Replace the Headlight Bulb on the KTM Duke 200
How to Replace the Headlight Bulb on the KTM Duke 200
Duke 200 To replace the headlight bulb on the KTM Duke 200, you need to loosen the screws that secure the headlight unit to its housing at the front of the bi…
How to Replace the Headlight Bulb on the KTM EXC 500?
How to Replace the Headlight Bulb on the KTM EXC 500?
Exc 500 To replace the headlight bulb on the KTM EXC 500, loosen the screws securing the front panel of the bike to its housing, located directly in front of…

How to change the transmission oil on the Honda PCX 150 scooter?

In this tutorial, you will see how to change the transmission oil on the Honda PCX 150 scooter, a very simple and quick operation. First, ensure the engine is completely cold, then locate the three bolts at the end of the casing and position a container underneath them. Next, remove the two inner bolts using a 12 mm socket, clean them of any dirt, and allow all the oil in the system to drain out. At this point, tighten the lower bolt and, using a pump or syringe, add new oil through the upper hole.

Watch the video!


by ScegliAuto

More videos