|
Do it yourself
| |||
| ||||
In order to replace the clutch of the KTM SX 50, you need to loosen the screws that secure the clutch cover panel, located on the right side of the bike: once the screws holding the panel are loosened, you can proceed by unscrewing the screws that hold the clutch discs in place. At this point, you can remove them completely in order to insert the new ones, then secure them with the appropriate screws; once the replacement is done, you will need to reinstall the side cover panel to ensure that everything is functioning properly.
Posted on 6 June 2024 by ScegliAuto
Video tutorial
Related tutorials
Sx 50
It will be possible to replace the clutch of the KTM SX 50 by loosening the screws that secure the cover casing located on the right side of the bike…
Sx 50
In this short and simple guide, you will see the steps to disassemble and replace the clutch discs on the Ktm XC 250 enduro bike. First, place your b…
Sx 50
This guide provides instructions on how to dismantle and replace the clutch assembly of the KTM SX 50 enduro bike. First, place the bike on a stand a…
|
How to Replace the Coolant in the Piaggio Medley 125?
To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container. Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.272
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |