Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Service on the KTM RC8

Model: Ktm Rc8
Part: Service warning light

Video tutorial

In this tutorial, you will see how to reset the oil service on the KTM RC8, an extremely simple and quick operation to perform only after completing the required scheduled maintenance work. First, insert the key, then turn on the instrument panel and hold down the two side buttons on the dashboard.

Once the settings menu appears, press the buttons again to activate the "SERVICE RESET" option, enter it, and confirm the reset. To verify that the procedure was successful, restart the vehicle.


Updated on 6 October 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in the KTM RC8
How to Change the Engine Oil in the KTM RC8
Rc8 As shown in this tutorial, changing the engine oil in the KTM RC8 is an extremely simple and quick task. First, wait for the engine to cool down suff…

How to change the transmission oil on the Honda PCX 150 scooter?

In this tutorial, you will see how to change the transmission oil on the Honda PCX 150 scooter, a very simple and quick operation. First, ensure the engine is completely cold, then locate the three bolts at the end of the casing and position a container underneath them. Next, remove the two inner bolts using a 12 mm socket, clean them of any dirt, and allow all the oil in the system to drain out. At this point, tighten the lower bolt and, using a pump or syringe, add new oil through the upper hole.

Watch the video!


by ScegliAuto

More videos