Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter in the KTM Duke 390?

Model: Ktm Duke 390
Part: Air filter

Video tutorial

In this tutorial, you will see how to replace the air filter in the KTM Duke 390, a very simple and quick operation. First, open the passenger seat using the motorcycle ignition key, then remove the rider's seat by unscrewing the two fixing bolts with a 10 mm socket.

Continue by unscrewing the additional bolts indicated using the same socket, then grasp the airbox cover and extract the old filter. At this point, clean the housing of any dirt residue, insert the replacement filter, and reassemble everything.


Updated on 17 October 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on a KTM Duke 390
How to Replace the Air Filter on a KTM Duke 390
Duke 390 Before you can start, position your KTM Duke 390 on its side stand. Begin by removing the passenger seat using the motorcycle key. Next, unclip and r…
Replacement of Air Filter on KTM Duke 250/390 2017
Replacement of Air Filter on KTM Duke 250/390 2017
Duke 390 Descriptive guide for replacing the air filter on a 2017 KTM DUKE 250/390. Obtain an air filter KTM p. N.90106015000. Position the motorcycle on the …
How to Replace the Air Filter on the KTM Duke 390?
How to Replace the Air Filter on the KTM Duke 390?
Duke 390 To replace the air filter on the KTM Duke 390, insert the key into the lock located on the right side of the bike: turning the key will allow you to …

How to Reset the Service Light on the Gilera Nexus 500

This video shows the procedure to reset the service light on the Gilera Nexus when the light remains on after a service. The procedure is straightforward and takes less than a minute. To reset the light, press the mode button and the odo/set button simultaneously. While holding them down, turn the ignition key to the ON position. Once the instruments are on, release the buttons and press the mode button once. The maintenance light will illuminate; hold the mode button for a few seconds to reset it.

Watch the video!


by ScegliAuto

More videos