Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the motor oil of a Kymco Dink?

Model: Kymco Dink
Part: Engine oil

Video tutorial

To change the motor oil of a Kymco Dink, start by placing the scooter on a center stand for added stability. Locate the oil drain plug, usually located on the bottom side of the engine.

Use a suitable wrench to loosen the drain plug and let the used oil drain completely into a collection container. Once all the oil has drained, securely screw the drain plug back on. Next, find the oil filler cap, usually located on one side of the engine.

Remove the cap and slowly pour the recommended amount of new motor oil for your scooter, following the owner's manual specifications. Make sure not to exceed the maximum level indicated on the oil level dipstick.

After completing the filling, screw the filler cap back on securely. Finally, start the engine for a few minutes and check for any oil leaks.

Make sure to properly dispose of the used oil at an authorized collection center.


Posted on 13 April 2025 by ScegliAuto


Related tutorials

How to Change the Transmission Oil in a Kymco Dink 150 Scooter?
How to Change the Transmission Oil in a Kymco Dink 150 Scooter?
Dink This tutorial shows how to change the transmission oil in a Kymco Dink 150 scooter, a very simple and quick operation. First, ensure the engine is su…
How to replace the engine oil in the Kymco Dink 150?
How to replace the engine oil in the Kymco Dink 150?
Dink You can perform the engine oil change on the Kymco Dink 150 by loosening the drain plug of the oil sump, which is located at the central lower part o…
How to Change the Engine Oil of the Kymco Dink 150
How to Change the Engine Oil of the Kymco Dink 150
Dink In this guide, you will discover the main steps to perform routine maintenance by changing the engine oil of the Kymco Dink 150 scooter. First, place…

How to replace the clutch lever on the Sherco SEF 300?

To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly.

Watch the video!


by ScegliAuto

More videos