Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The replacement of the motor oil of the Kymco Agility 125 can be done by loosening the drain plug located in the central lower part of the motorcycle: once this has been removed, all the oil can be drained into a container placed appropriately. At this point, it will be possible to remove the filter located in the lower part of the motorcycle so that a new one can be inserted; then it will be possible to top up. To do this, the necessary amount of oil must be inserted through the vent located on the right side of the motorcycle.

Posted on 26 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you change the engine oil of the Kymco Agility 125?
How do you change the engine oil of the Kymco Agility 125?
Agility 125 To ensure that the engine oil of the Kymco Agility 125i is replaced, you will need to loosen the drain plug of the oil pan, which will be located in …
How to Change the Engine Oil in the Kymco Agility 125 Scooter
How to Change the Engine Oil in the Kymco Agility 125 Scooter
Agility 125 In this tutorial, you will see how to change the engine oil in the Kymco Agility 125 scooter, an extremely simple and quick operation. First, ensure …
How to Replace the Engine Oil and Air Filter on a Kymco Agility 125
How to Replace the Engine Oil and Air Filter on a Kymco Agility 125
Agility 125 Today we will discover the instructions that will allow us to replace the engine oil and air filter of the Kymco Agility 125 scooter, performing rout…

Replacing the Front Brake Pads on the Piaggio Vespa 50 LX

This guide will illustrate the instructions on how to remove and replace the front brake pads on the Piaggio Vespa 50 LX. First, place your scooter on the centre stand and start unscrewing the nuts securing the front wheel to remove it; then use pliers to remove the brake pad retaining clip, as shown in the video. At this point, remove the old pads, cleaning the caliper of dirt; press the caliper piston back to allow for the installation of the new pads (of excellent quality). Finally, reassemble the front wheel.

Watch the video!


by ScegliAuto

More videos