Do it yourself
Frequently asked questions about cars and motorcycles
The oil in the transmission of the Kymco Xciting S 400i can be replaced after the transmission has been removed. To do this, you will need to loosen the screws that secure the protective cover located near the rear wheel, on the left side of the motorcycle. Once this has been removed, you can proceed by loosening the drain plug of the reservoir, which is located under the transmission cover. Once the oil has completely drained out, you can refill it by inserting the oil into the vent using a plunger.

Posted on 4 January 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Xciting S 400i To perform the oil change on the Kymco Xciting S 400i, you will need to loosen the screws that hold the drain plug of the oil pan located in the cent…
Xciting S 400i To replace the transmission on the Kymco Xciting S 400i, you need to loosen the bolts that secure the transmission cover, which is located near the r…
Xciting S 400i To change the engine oil on the Kymco Xciting S 400i, you need to unscrew the oil drain plug located at the bottom of the bike: this will allow you t…

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos